TM 5-6675-316-14
Remove mounting screws from switch.
h.
Remove retaining clip and pin from solenoid shaft.
i.
Remove defective solenoid.
j.
k.
Install new solenoid and secure with mounting screws.
Reinstall pin and retaining clip.
1.
m.
Connect wires to new solenoid.
Reinstall front panel.
n.
Reinstall center panel.
o.
Turn on circuit breaker.
p.
Turn on power switch.
q.
r.
Close top left panel.
Perform diagnostic test.
s.
2-247
