TM 5-6675-316-14
(5) Enter section and be sure safety switch, main circuit breaker, and all
equipment power supply switches are off.
WARNING
Death or serious injury may result from connecting power cable to section
before grounding.
(6) Remove ground rod, slide hammer, and ground cable
from section.
NOTE
q Apply a thin film of grease to threaded ends of rods before driving into
ground.
This will permit easy disassembly upon removal from ground.
q Bottom ground rod must be numbered or identified so that it will always be
the first rod driven into the ground.
q These instructions supplement TC 11-6, Grounding Techniques.
1-29
