TM 5-6675-316-14
(2) Approximately level trailer chassis by raising or lowering landing
gear.
(3) Move handle from secured location and swing out.
(4) Pull crank handle on each leveling jack all the way out and engage.
There are two positions when handle is engaged. Fully out is high speed. Partially
out is low speed.
(5) Lower each leveling jack by turning crank to right at high speed until
foot plate just contacts ground.
(6) Station personnel to have a clear view of level indicators at both front
and rear of section.
(7) Observe level indicators to determine which end and side must be raised.
1-25
