TM 5-6675-316-14
1.6. OPERATION UNDER USUAL CONDITIONS. Operation of the Drafting Support
Section consists of activation of power after the section has been located at the
operation site and 12 V dc power disconnected.
1-6.1 Preparation for Use.
Procedures for Leveling.
a.
CAUTION
Trailer-mounted section must be on surface that is approximately level to
avoid unnecessary stress or twisting of chassis when-section is-leveled.
NOTE
Snow or ice should be removed from under leveling foot plate before attemp-
t i n g to level section.
Sand, soft ground, or mud requires that shoring or scrap material be placed
u n d e r leveling foot plate to increase surface area and prevent sinking
into surface.
. Be sure that air suspension
is deflated as indicated in TM 5-2330-305-14.
1-24
