TM 5-6675-315-14
h. Turn safety switch OFF.
i. Have power cable disconnected at power supply end. Then disconnect power cable from receptacle. Put cable
in storage box on trailer chassis.
j. Turn emergency light switch OFF.
k. Disconnect telephone cables from power entry panel.
l.
CAUTION
To prevent loss of rod or thread damage, do not allow grounding rod to rotate and unscrew
when removing the slide hammer rod.
1.
Remove grounding rod with slide hammer, and put grounding rods, couplings, and slide hammer inside
van body. Clean threads on each grounding rod before storing.
NOTE
Be certain exhaust fan and air vent doors are securely closed.
m.
Reinspect section interior for loose equipment and close all vent doors.
n.
Close section. Secure and lock all doors and cargo door.
NOTE
Be sure air conditioner/heater covers are down and secured.
o.
Remove handrails from boarding ladders.
p.
Remove boarding ladders and insert rails into back of ladders.
q.
Secure ladders to back of section.
r.
Fully extend landing gear.
s.
Retract leveling jacks.
t.
Visually inspect section exterior to be sure all equipment and covers are secured.
1-35
