TM 5-6675-315-14
e.
Loosen holding screw on side of baling safety switch KS activator.
f.
Lift rear gate.
CAUTION
If activator is not adjusted with gate up or pressed too close to switch housing, damage to
switch can result.
g.
Slide activator against baling safety switch KS until switch closes.
h.
Retighten activator holding screw.
i.
Remount spacer bushings and rear cover.
j.
Drop mounting screw through rear cover and spacer bushing. Retighten screws.
k.
Turn on circuit breaker.
l.
Turn on main power switch.
2-121
