TM 5-6675-314-14
c. Turn clips 90° to left or right.
CAUTION
Glass surface must be handled with care to avoid chipping or breaking.
d.
e.
f.
g .
h.
i.
j.
k.
l.
m.
n.
Remove glass surface and set aside.
Remove screws and front cover panel.
Tag and disconnect wires.
Remove inner and outer strain relief bushings and remove defective power
cord.
Reinstall inner and outer strain relief bushings on new power cord.
To install, connect wires to power cord and remove tags.
Reinstall front cover panel and secure with screws.
Reinstall glass surface.
Turn clips 90° to secure glass surface.
Reinstall screws on clips. Tighten all screws.
Plug in power cord and turn power switch ON.
2-22
