TM 5-6675-302-14&P
c. Reassembly. Refer
to figure 5-16 and
(2) Install the tribrach assembly paragraph
reassemble the target plate carrier.
4-9.
e. Adjustment. If, after the circular level has
d. Installation.
been adjusted (para 5-8), the target level bubble is
(1) Refer to figure 5-14 and install the target
far off center, the target level is out of adjustment.
Tighten or loosen the adjusting screw (13, fig. 5-16)
plate on the target plate carrier.
to bring the bubble to center.
1. Bracket
2. Spring
3. Machine screw (2)
4. Housing
5. Plastic cover
6. Level vial
7. Cap
8. Bearing
9. Adjusting screw
10. Washer
Figure 5-13. Target level assembly, model 242406, exploded view
5-17