Figure 12. Sight, removal and installation.
c. Installation.
b. Cleaning and Inspection.
(1) Refer to figure 11 and install the
(1) Clean all parts with an approved
rheostat.
cleaning solvent and dry thoroughly.
(2) Install the rheostat knob (para 26).
(2) Inspect for cracks, breaks, and other
damage.
33. Sight
(3) Replace a damaged or defective sight.
a. Removal. Refer to figure 12 and remove
c. Installution. Refer to figure 12 and install
the sight.
the sight.
16
AGO 10117A