Figure 10. Filter and contact assembly, removal and installation.
b. Cleaning and Inspection.
(1) Clean all parts with a clean, dry, lint
free cloth.
(2) Inspect for cracks, breaks, and other
damage.
(3) Replace a damaged or defective level
retainer and level.
c. Installation.
(1)
(2)
1
4
Refer to figure 9 and install the level
retainer and level.
Install the mirror (para 29).
31. Filter and Contact Assembly
a. Removal. Refer to figure 10
the filter and contact assembly.
b. Cleaning and Inspection.
and remove
(1) Clean the filter and contact assembly
with a soft brush or clean, dry, lint
free cloth.
(2) Inspect for cracks, breaks, and other
damage.
(3) Replace a damaged or defective fil-
ter and contact assembly.
AGO 10117A
