.
Figure 7. Front plate assembly, removal and installation.
Section V. HOUSING
24. General
b.
This section contains information on the
maintenance of the housing assembly and its
components. These include the locking wedge,
rheostat, lamp bracket, contact strip, mirror,
level retainer and level, filter and contact as-
sembly, and sight.
25. Locking Wedge
a. Removal. Refer to figure 8 and remove the
c.
locking wedge.
the locking wedge.
ASSEMBLY
Cleaning and Inspection.
(1) Clean all parts with an approved
cleaning solvent and dry thoroughly.
(2) Inspect for cracks, breaks, and other
damage.
(3) Replace a damaged or defective lock.
ing wedge.
Installation. Refer to figure 8 and install
AGO 10117A
11
