TM 5-3610-287-24
2-44.
REPAIR WATER TANK ASSEMBLY (CONT)
WARNING
CHEMICAL HAZARD. Use rubber cement thinner in a well-
ventilated area. Failure to do so may result in damage to
respiratory system. Wear gloves and goggles to prevent
injuries to skin and eyes.
22.
Clean rubber cement from back of rubber molding (16) with rag and
rubber cement thinner.
Spread rubber cement on rubber molding (16) and install on water
23.
tank (15).
Pull elbows (14) from under water tank (15) and position.
24.
Install T-assembly (13).
25.
Install nylon adapter (12).
26.
Install hose (11) with clamp (10).
27.
Install gate valve assembly (9) with clamp (8). Tighten union (7).
28.
29.
Install coupling with copper fitting (6).
WARNING
CHEMICAL HAZARD. Use silicone compound in a well-ventilated
area. Silicone compound is harmful to eyes and skin. In
case of contact with eyes, immediately flush eyes with water
for 15 minutes, then seek medical help. In case of contact
with skin, wipe off with dry cloth, then wash with soap and
water.
Apply silicone compound to ferrule on probe (5) and install with
30.
B-nut (4).
Install nylon adapters (3).
31.
Install hoses (2) with clamps (1).
32.
Install pile boards in feeder board storage rack and secure locking
33.
bar.
Install immersion heater and liquid level gage (para 2-44).
34.
2-124
