TM 5-3610-287-24
2-33. REPLACE MODIFIED FIVE-DRAWER STORAGE CABINET (CONT)
Remove rollers from roller rack assembly.
3.
Remove bolts (1), lockwashers , and flatwashers securing upper roller
4.
rack assembly mounting plate (2) to modified five-drawer storage
cabinet (3).
Remove roller rack cover (4) from spare roller rack (5).
5.
Loosen wingnuts (6) on locking spindles (7) and remove spare roller
6.
rack top frames (8).
Remove rollers from spare roller rack (5).
7.
Remove bolts (9), lockwashers, flatwashers, and mounting plates (10)
8.
securing modified five-drawer storage cabinet (3) to floor.
WARNING
Storage cabinet weighs approximately 70 pounds (32 kg). Use
proper lifting techniques. Do not attempt to lift by
yourself. Failure to observe this warning may result in
personal injury.
Remove storage cabinet (3).
9.
INSTALLATION
1.
Install new modified five-drawer storage cabinet (3) with bolts (9),
lockwashers, flatwashers , and mounting plates (10).
2.
Secure storage cabinet (3) to upper roller rack assembly mounting plate
(2) with bolts (1), lockwashers, and flatwashers.
3.
Install rollers in spare roller rack (5).
4.
Install top frames (8) on spare roller rack (5) and secure with
wingnuts (6) and locking spindles (7).
5.
Install cover (4) on spare roller rack (5).
6.
Close and lock equipment door.
7.
Connect blackout curtain to equipment door.
2-84
