TM 5-3610-287-24
2-15.
REPAIR REMOVABLE FLOOR SECTION CARRIER BRACKETS (CONT)
1.
Scrape old rubber pads (1) from carrier bracket (2).
WARNING
CHEMICAL HAZARD. Use rubber cement thinner in a well-
ventilated area. Failure to do so may result in damage to
respiratory system. Wear gloves and goggles to prevent
injuries to skin and eyes.
2.
Clean adhesive from carrier bracket (2) with rubber cement
thinner.
WARNING
CHEMICAL HAZARD. Use adhesive in a well-ventilated area.
Adhesive is harmful to eyes and skin. In case of contact
with eyes, immediately flush eyes with water for 15 minutes,
then seek medical help. In case of contact with skin, wipe
off with dry cloth, then wash with soap and water.
3.
Apply adhesive to carrier bracket (2) and install new rubber pads (l).
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Portable electric drill
Twist drill set
Rivet gun (appendix B , section III, item 10)
Materials/Parts
Latch and strike, 13200E2799
Rivets, MS20600-MP4W6
Rivets, MS20600-AD6W4
2-42
