TM 5-3610-286-20
2-63.
Trip Block Assembly.
This task covers:
a. Service
b. Remove
c. Repair
d. Install
INITIAL SETUP
Tools
Equipment Conditions
3 mm hex key
Delivery plexiguard removed (para. 2-21)
10 mm combination wrench
Lower guard (O/S) door open (para. 2-19)
8 mm combination wrench
7 mm combination wrench
a.
b.
Service. Lubricate at grease point (LO 5-3610-286-12).
Remove. (figure 2-142)
(1) Loosen two locknuts (1) and remove two hex-head screws (2) and tension spring (3).
(2) Loosen socket-head set screw (4) and remove lever (5).
(3) Remove two hex-head screws (6) and trip block assembly (7).
(4) Remove two stop screws (8).
2-320
