TM 5-3610-286-20
2-62.
Cam Lever Assembly (cont).
c. Install. (figure 2-141)
(1) Install shaft (1) into O/S side frame.
(2) Install levers (2), outer shaft (1), and replace shaft into D/S side frame.
(3) Install retaining ring (3) and grease fitting (4).
(4) Install two taper pins (5).
(5) Install lever (6) and taper pin (7).
(6) Install end of tension spring (8) on screw (9).
(7) Tighten socket-head screw (9) and hex nut (10).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Replace delivery sheet stop (para. 2-55).
(2) Replace delivery plexiguard (para. 2-21).
(3) Close lower guard (O/S) door (para. 2-19).
2-318
