TM 5-3610-286-20
2-59.
Suction Drum Motor (cont).
b. Install. (figure 2-135)
(1)
(2)
(3)
(4)
(5)
(6)
Loosen terminal nuts on connector terminals (1) and install three tagged black phase
leads. Tighten terminal nuts and remove tags.
lnstall green/white ground lead on slotted ground screw (2) and tighten screw.
Install gasket (3) and terminal box cover (4). Replace four screws (5).
Apply joint compound to motor gear box coupling surfaces and join motor (6) to gear box
coupling (7).
NOTE
Aline motor shaft pin (8) with key slot in gear box shaft at coupling (7).
Replace four socket-head screws (9).
Slide suction drum assembly (10) all the way in.
2-306
