TM 5-3610-286-20
2-54.
Delivery Light Assembly.
This task covers:
Replace
INITIAL SETUP
Tools
Additional Personnel Requirement
10 mm combination wrench
Electrician MOS 83E20
Equipment Conditions
Delivery plexiguard open (para. 2-21)
Lower guard (O/S) door open (para. 2-19)
Flourescent lamp and starter removed
(TM 5-3610-286-10)
a. Replace. (figure 2-119)
(1) Remove two hex-head screws (1) and lamp fixture (2).
(2) Tag and remove wires (3) from lamp fixture (2).
(3) Remove hex nut (4) and cable (5).
(4) Remove two hex-head screws (6) and two support bolts (7).
(5) Replace two hex-head screws (6) in press side frames and replace two support bolts (7).
(6) Replace cable (5) and hex nut (4).
(7) Replace tagged wires (3) to lamp fixture (2) and remove tags.
(8) Position lamp fixture (2) on support bolts (7) and replace two hex-head screws (1).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install fluorescent lamp and starter (TM 5-3610-286-10).
(2) Close lower guard (O/S) door (para. 2-19).
(3) Close delivery end plexiguard (para. 2-21).
2-276
