TM 5-3610-286-20
2-55.
Sheet Stop Assembly (cont).
b. Repair. (figure 2-121)
(1) Remove two spring pins (1), pins (2), and roller bearings (3) from guide sleeve (4).
(2) Remove two screws (5), hex nuts (6), and bars (7) from sheet stop (8).
(3) Remove spring pin (9) and remove sheet stop (8) from rod (10).
(4) Replace components showing excessive wear, distortion, damaged threads, cracks,
bends, contaminated bearings, or missing components.
(6) Install two screws (5), bars (7), and hex nuts (6) on sheet stop (8).
(7) Install two pins (2), roller bearings (3), and spring pins (1) on guide sleeve (4).
(8) Install repaired sheet stop assembly as in replace procedure.
2-280