TM 5-3610-286-20
2-53. Dust Catcher Assembly.
This task covers:
a. Replace
b. Repair
INITIAL SETUP
Tools
0.050 x 0.375 x 8 in. flat-tip screwdriver
10 mm combination wrench
30 mm combination wrench
a. Replace. (figure 2-118)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Unlatch four clamps (1) and remove dust catcher (2).
Remove filter cartridge (3) and two gaskets (4).
Loosen hose clamps (5) and remove hoses (6).
Remove four slotted-head screws (7), four nuts (8), bracket (9), and dust catcher
housing (10).
Install dust catcher housing (10), bracket (9), four nuts (8), and four slotted-head
screws (7).
Install hoses (6) and tighten hose clamps (5).
Install two gaskets (4) and filter cartridge (3).
Install dust catcher (2) and latch four clamps (1).
b. Repair. (figure 2-118)
(1) Unscrew and replace damaged nipples (11).
(2) Unscrew and replace damaged pipe guides (12).
(3) Replace damaged filter (3) and brittle or compressed gaskets (4).
(4) Replace missing or clogged valve (13).
2-274
