TM 5-3610-286-20
2-48.
Suction Valve Housing Assembly and Motor (cont).
b. Remove.
(1) Suction valve housing assembly. (figure 2-99).
(a) Remove four lower hose clamps (1) and separate four hoses (2) from valve
housing (3).
(b) Remove large hose (4) from valve housing (3) and pull other end of hose from suction
motor.
(c) Remove hex-head cap screw (5), hex nut (6), and valve housing (3).
(d) Remove four upper hose clamps (7) and hoses (2).
(e) Remove two springs (8).
(f) Remove pin (9) and two bar halves (10).
(g) Remove two hex-head bolts (11) and washers (12).
(h) Remove two hex-head bolts (13) and valve housing support (14).
2-240
