TM 5-3610-286-20
2-28.
Journal Box Housing Assembly (cont).
b. Repair.
(1) Replace broken or weak compression spring.
(2) Replace worn or binding worm gears.
(3) Replace frozen or binding bearing.
(4) Replace compressed or torn gaskets.
c. Install. (figure 2-48)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
2-138
Replace worm gear (1), spacer (2), worm gear housing (3), two washers (4), and two
socket-head screws (5).
Replace journal box (6) and hex-head screw (7).
Replace bearing (8), gaskets (9), and three socket-head screws (10).
Replace retaining ring (11), gasket (12), journal box housing (13), spacers (14),
journal box housing (15), and bearing (16).
Replace three socket-head screws (17).
Replace lubrication line (18).
Replace pin (19), rod head (20), washer (21), retaining ring (22), and hex nut (23).
Replace spring rod (24), compression spring (25), and tighten hex nut (23).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install roller guide assemblies (para. 2-25)
(2) Install ink oscillator rollers (TM 5-3610-286-10).
(3) Install inking form rollers (TM 5-3610-286-10).
(4) Install main guard assembly (D/S) (para. 2-20).
