TM 5-3610-286-20
2-27.
Swivel Lever Assemblies (cont).
c. Install. (figure 2-46)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
Install bearing (1), washers (2), and three socket-head screws (3).
Install swivel levers (4), shim (5), spacer (6), and retaining ring (7).
Install journal box housing (8), shims (9), and journal box housing (10).
Install spring rod (11), spring (12), washer (13), and locking hex nut (14). Tighten
lock nut.
Install six socket-head screws (15).
Install pull rod (16), washers (17), and retaining ring (18).
Install spring (19), stop piece (20), cable clamp (21), and screw (22).
Insert journals (23) in journal boxes (24). Install shims (25) and insert journal box (24)
through journal box housing (8) and swivel levers (4).
Install retaining ring (26).
Install ball bearing (27), lock sleeve (28), and gasket (29).
Install retaining ring (30), spacer (31), and colored cap (32).
d. Adjust. Adjustment of swivel levers is covered in TM 5-3610-286-10.
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install ink oscillator rollers (TM 5-3610-286-10).
(2) Install form rollers (TM 5-3610-286-10).
(3) Install upper guard and accessories (O/S) (para. 2-18).
2-134
