TM 5-3610-286-20
2-19.
Lower Guard and Accessories (O/S).
This task covers:
a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
4 mm hex key
6 mm hex key
8 mm hex key
1.0 x 1.6 x 0.5 mm flat-tip screwdriver
a. Remove. (figure 2-18)
(1) Remove thumbscrew (1), socket-head screw (2), and suction roller movement knob (3).
(2) Remove socket-head screw (4) in center of guard.
(3) Remove two socket-head screws (5) at bottom of guard.
(4) Remove four socket-head screws (6) from inside of O/S frame (7) (two on feeder end and
two on delivery end).
(5) Remove lower guard (8).
(6) Remove two slotted screws (9) and tool tray (10).
(7) Remove thumbscrew (11) and lower guard locking tab (12).
2-78
