TM 5-3610-286-10
2-7.
OPERATING PROCEDURES (CONT)
c. Prepare Cylinder Assembly (Cont)
(b) Insert tail edge of blanket (1) into other blanket bar (4) and
tighten eight hex head screws (3), starting from center and working out.
(c) Using micrometer, measure four corners of blanket, add
together, and divide by four to find average thickness of blanket.
NOTE
The bearer height of the Printing Press is 0.090 in.
(0.23 cm).
(d) Determine amount of packing required to bring blanket to bearer
height by subtracting average thickness of blanket from bearer height.
(e) Mount blanket and packing.
2-52
