TM 5-3610-286-10
2-8.
OPERATION OF AUXILIARY EQUIPMENT (CONT)
d.
Packing Gage
(1) Set all
NOTE
Use light pressure when measuring the blanket.
dials on packing gage to zero by rotating face of dial.
(2) Place packing gage squarely on blanket cylinder so that dial (1)
rests on bearer of cylinder.
(3) Take readings from dial (2) and dial (3). Readings should
be the same as dial (1) if blanket cylinder is packed properly (para
2-7c (1) (c) and (d)).
NOTE
Refer to metric conversion chart on back cover of this
manual.
2-109
