TM 5-3610-285-14
10-10.3 Replace Contact Printing Lamp.
MOS: 83E, Photo and Layout Specialist
TOOLS: None Required
SUPPLIES: Contact Printing Lamp
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before servicing.
a.
Unplug power cord for timer/power supply control box.
b.
Press in on wire retaining ring and remove it.
c.
Remove filter holder.
d.
Remove defective lamp.
e.
Install new lamp.
f.
Insert filter holder into bottom of lamp housing.
g.
Squeeze wire retaining ring and insert it on top of filter holder.
h.
Release wire retaining ring so ring snaps into place and locks filter holder into position.
i.
Plug in power cord for timer/power supply control box.
10-27
