TM 5-3610-285-14
a. Unplug power cord and probe.
b. Remove plastic table platen.
c. Remove plastic wire ties securing lamps to lamp holders.
d. Remove lamp(s).
e. Install new lamp(s).
f. Install new plastic wire ties.
g. Install plastic table platen.
h. Plug in power cord and probe.
7-16.17. Aline Transmission Probe Optical System.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Tool Kit, Light Machine Repair
Flat Tip Screwdriver
Nut Driver Set
a. Install smallest aperture assembly.
b. Move densitometer power switch to ON position.
c. Place a piece of translucent white paper over target area.
d. If a focused image of filament appears, no alinement is necessary.
7-57
