TM 5-3610-285-14
d.
Tag and desolder wires from defective transformer.
e. Remove screws, nuts, and washers securing transformer to chassis.
f.
Remove defective transformer.
g. Solder wires to new transformer and secure to chassis with screws, washers and nuts.
h. Reinstall chassis cover and secure with screws.
i. Plug in reflection/transmission probe cable.
j. Plug in power cord.
7-16.9 Replace Voltage Selection Switch.
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Tool Kit, Electronic Repair
Flat Tip Screwdriver
Needle Nose Pliers
Soldering Iron
SUPPLIES: Voltage Selection Switch
Solder
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged
before repairing equipment.
a. Unplug power cord.
b. Unplug reflection/transmission probe cable.
c. Remove four screws and chassis cover.
d. Tag and desolder wires from voltage selection switch.
7-47
