TM 5-3610-285-14
d. Tag and desolder wires from POWER switch.
e. Remove nut securing switch to front panel.
f. Replace defective switch.
g. Solder wires to switch.
h. Reinstall chassis cover and secure with screws.
i. Plug in reflection/transmission probe cable.
j. Plug in power cord.
7-16.6 Replace Fuse Holder.
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Tool Kit, Electronic Repair
Flat Tip Screwdriver
Needle Nose Pliers
Soldering Iron
SUPPLIES: Fuse Holder
Solder
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged
before repairing equipment.
a. Unplug power cord.
b. Unplug reflection/transmission probe cable.
c. Remove four screws and chassis cover.
7-43
