TM 5-3610-285-14
d. Note terminal that white wire is attached to and desolder power cord white and black wires.
e. Remove screw and washer securing green wire to chassis.
f. Remove and retain strain relief bushing.
g. Remove defective power cord.
h. Install new power cord.
i. Install green wire to chassis with screw and washer.
j. Solder white wire as noted and black wire to fuse holder.
k. Reinstall chassis cover and secure with screws.
l. Plug in reflection/transmission probe cable.
m. Plug in power cord.
7-16.12 Replace FOURTH-DIGIT ON/OFF Switch.
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Tool Kit, Electronic Repair
Flat Tip Screwdriver
Needle Nose Pliers
Soldering Iron
SUPPLIES: FOURTH-DIGIT ON/OFF Switch
Solder
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged
before repairing equipment.
a. Unplug power cord.
b. Unplug reflection/transmission probe cable.
c. Remove four screws and chassis cover.
7-51
