TM 5-3610-285-14
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged
before repairing equipment.
a. Unplug power cord.
b. Unplug reflection/transmission probe cable.
c. Remove four screws and chassis cover.
d. If SLOPE control is under filter light shield, remove four screws securing filter light shield; remove light shield.
e. Tag and desolder wires from SLOPE control.
f. Remove nut securing SLOPE control to chassis.
g. Remove defective SLOPE control.
h. Solder wires to new SLOPE control. Install nut securing SLOPE control to chassis.
i. Reinstall light shield (if removed) and secure with screws.
j. Reinstall chassis cover and secure with screws.
k. Plug in reflection/transmission probe cable.
l. Plug in power cord.
7-49
