TM 5-3610-285-14
(16)
Open bleed valve to bleed vacuum off vacuum frame.
(17)
Unlock the left-and right-hand latches and lift the glass frame until the two lift arms take hold and open the frame
completely.
(18)
Carefully remove and separate the two films. Store the original film in a safe place.
(19)
Process the newly exposed film.
(20)
Check the results. Use a magnifier on highlight, middletone, and shadow dots in checking accuracy of the
image. The contact control guide provides several visual targets for checking exposure accuracy.
6-6.3
Preparation for Movement.
a.
Unplug power cords for vacuum pump control box and timer/power supply control box.
b.
Be sure that glass frame is locked in place.
c.
Remove filter holder and wire retaining ring from contact printing lamp, and store in designated cabinet.
6-20
