TM 5-3610-285-14
NOTE
Keep all components of each roller assembly together. Tag each roller assembly to be sure of proper
reassembly.
h.
Remove shaft from exit roller assembly.
i.
Remove exit roller assembly, spacer, and bearings from between end plates.
j.
Loosen nut and remove each stud from ends of resilient roller assembly. Tag and remove roller assembly. Keep
all components of roller assembly together.
NOTE
Several other rollers must be removed to gain access to an inner roller.
k.
Locate defective roller and pry out roller stud from right end plate opposite chain end.
l.
Remove roller assembly.
m.
Remove roller stud from left end plate if defective.
n.
Pry chain link apart and remove chain.
o.
Inspect all components for excessive wear or damage. Replace any defective components.
5-218