TM 5-3610-285-14
e.
Loosen screws at each end of switch mounting bracket. Remove screws from end of switch mounting bracket
closest to switch to be replaced. Remove bracket and switches.
f.
Tag and disconnect wiring from switch.
g.
Unscrew adjusting nut and remove switch.
h.
Install new switch and retain with adjusting nut.
i.
Reconnect wiring.
j.
Reinstall switches and mounting bracket to detector roller assembly. Retain with screws.
k.
Adjust detector switches (refer to Table 5-3, Item 1).
l.
Reinstall plastic inner cover and detector roller cover.
m.
Reinstall entrance crossover.
n.
Reinstall top cover.
o.
Turn on processor circuit breaker.
5-147
