TM 5-3610-285-14
h.
Reconnect wires using bolt connectors under blowers, and retape bolt connectors.
NOTE
It may be necessary to remove blowers/heater housing front cover plate to properly aline blowers'
exhausts.
i.
Carefully reinstall blowers and blowers mounting plate so that blowers' exhausts fit through portal holes of
frame, and screw holes on top aline.
j.
Reinstall pencil tray and blowers/heater housing front cover panel if removed.
k.
Plug in power cord.
3-16.5 Replace Power Cord.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Tool Kit, Light Machine Repair
Flat Tip Screwdriver
7/16 in. Combination Wrench
SUPPLIES: Power Cord
Electrical Tape (Item 59, Appendix E)
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before servicing.
a.
Unplug power cord.
3-32