TM 5-3610-285-14
Table 3-1. OPERATOR PREVENTIVE NAINTENANCE CHECKS AND SERVICES-Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM TO BE INSPECTED
For Readiness
IN
Reporting
ITEM
TER-
PROCEDURE
Equipment Is
NO.
VAL
Not Ready/
Available If:
PLATE FINISHING TABLE -Cont
2
B/A
Clean-Cont
2.
Unplug power cord.
3.
Wipe formica table top surface with cheese-
cloth moistened in mild solution of deter-
gent and water to remove all stains.
4.
Wipe formica table top surface dry with
cheesecloth to remove streaks and smears.
5.
Wipe remaining surfaces, storage tray,
blowers/heater housing, and storage
shelves clean with damp cheesecloth.
6.
Plug in power cord.
3-6. OPERATION UNDER USUAL CONDITIONS.
3-6.1 Assembly and Preparation for Use.
a.
Perform before operation PMCS.
b.
Plug in power cord.
c.
Place power switch in desired operating position, either blowers on, or blowers and heater on.
3-9
