Table 3-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND
B - Before
W - Weekly
AN - Annually
D - During
M - Monthly
s
- Semiannually
A - After
ITEM
NO.
2
lN-
TER-
V AL
B/A
Q - Quarterly
BI
- Biennially
TM 5-3610-259-14
SERVICES - Cont
(Number) - Hundreds of Hours
ITEM TO BE INSPECTED
PROCEDURE
PLATE FINISHING TABLE - Cont
Clean - Cent
2. Unplug power cord.
3.
Wipe formica table top surface with cheese-
cloth moistened in mild solution of deter-
gent and water to remove all stains.
4.
Wipe formica table top surface dry with
cheesecloth to remove streaks and smears.
5. Wipe remaining surfaces, storage tray,
blowers/heater housing, and storage
shelves clean with damp cheesecloth.
6.
Plug in power cord.
For Readiness
Reporting,
Equipment Is
Not Ready/
Available If:
3-6. OPERATION UNDER USUAL CONDITIONS.
3-6.1 Assembly and Preparation for Use.
a.
Perform before operation PMCS.
b. Plug in power cord.
c.
Place power switch in desired operating position, either blowers on, or
blowers and heater on.
3-9
