B -
Table 3-1. OPERATOR
TM 5-3610-259-14
PREVENTIVE MAINTENANCE CHECKS AND SERVICES
NOTE
If the equipment must be kept in continuous operation, check and service only
those items that can be checked and serviced without disturbing operation.
Make the complete checks and services when the equipment can be shut down.
Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
s
- Semiannually
A - After -
ITEM
NO.
1
IN-
TER-
VAL
B/D
Q - Quarterly
BI
- Biennially
ITEM TO BE INSPECTED
PROCEDURE
PLATE FINISHING TABLE.
Inspect.
1.
2.
3.
4.
Place blowers/heater switch to center
position.
Inspect formica table top for cracks or
deep scratches which may affect operation.
Inspect blowers/heater housing for dents
or missing parts (bolts, screws, etc.).
Place blowers/heater switch to left and
verify blowers turn on and no heat is
produced.
For Readiness
Reporting,
Equipment Is
Not Ready/
Available If:
Dents or miss-
ing parts.
Blowers fail to
operate and/or
heat is pro-
duced .
3-7
