TM 5-3610-259-14
4.
Secure new latch assembly with screws and brackets. Be sure that
shims permit latch assembly to turn freely without chafing or
binding.
DOOR GASKET
NOTE
Door gasket should be tested any time door is removed
for maintenance; hinges, rollers, or other components
are replaced; or if any noticeable increase in moist-
ure, heat, cold, or dust is noticed inside van body.
1.
Open door to full opening and secure in open position.
NOTE
This step may be omitted if
gasket is torn or damaged.
2.
Chalk edge of gasket. Then secure
door and inspect inside door frame
ferred completely to frame without
door in closed position. Open
to see if chalk has been trans-
gaps or breaks.
1-111
