TM 5-3610-259-14
12.
Secure top with flip/top hold down brackets.
13.
Remove lag bolts from base mounting brackets.
WARNING
THE FLIP/TOP PLATEMAKER IS HEAVY AND REQUIRES THREE
PERSONS TO MOVE IT OR SERIOUS PERSONAL INJURY MAY
RESULT.
14.
Use hand truck to remove machine from section.
15.
Position new machine and secure with
16.
Remove flip/top hold down brackets.
17.
Reconnect wires and remove labels.
18.
Reconnect cable to junction box.
lag bolts.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
Reinstall cover and secure with screws.
Turn on circuit breaker.
Turn on power switch.
Check for proper operation.
Reinstall Plate Finishing Table (para 1.4.7.4).
Reinstall Photolithographic Supply Storage Cabinet (5 Drawer)
(para 1.4.7.9).
Reinstall Sink (para 1.4.7.5).
Reinstall Plate Finishing Table (para 1.4.7.4).
Reinstall Photolithographic Supply Storage Cabinet (1 Drawer)
(para 1.4.7.2).
Reinstall Drafting, Scribing/Tracing Table (para 1.4.7.1).
1-103
