TM 5-3610-257-14
Table 6-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
ROLLERS DO NOT ROTATE.
Step 1. Check for unplugged power cord.
(a)
If power cord is plugged in, proceed to step 2.
(b)
Plug in power cord.
Step 2. Check for tripped circuit breaker switch.
(a)
If circuit breaker is not tripped, proceed to step 3.
(b)
Reset circuit breaker.
Step 3. Check FUSE indicator light.
Replace fuse (paragraph 6-10.1).
Step 4. Check motor speed control setting. Adjust motor speed control.
2.
ROLLERS ROTATE BUT AIRFLOW IS RESTRICTED.
Check for dirty filter.
Replace filter (paragraph 6-10.2).
6-10.
MAINTENANCE PROCEDURES.
a.
This section contains instructions covering operator maintenance functions for the film dryer. Personnel required
are listed only if the task requires more than one.
b.
After completing each maintenance procedure, perform operational check to be sure that equipment is properly
functioning.
INDEX
PROCEDURE
PARAGRAPH
Replace Fuse ................................................................................................................. 6-10.1
Replace Fuse ................................................................................................................. 6-10.2
6-12
