TM 5-3610-257-14
Table 1-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
B- Before
W- Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
IN
FOR READINESS
ITEM TER
ITEM TO BE INSPECTED
REPORTING
NO.
VAL
PROCEDURES
EQUIPMENT IS
NOT READY /
AVAILABLE IF:
VAN BODY - Cont
2
B/D
Inspect Interior - Cont
D
4.
Check safelights. Replace bulbs if necessary.
W
5.
Inspect walls, ceiling, and floor for holes,
open seams, or signs of seepage or leaks.
W
6.
Water system. Check for leaks beneath sink and
Leaks are
water storage tank.
present.
D
7.
Check storage cabinets for broken hinges,
latches, and locks.
B/M
8.
Inspect fire extinguishers. Be sure security
seals are not broken.
Q
9.
Inspect circuit breaker panel.
Defective
circuit
breaker.
NOTE
Inspection is to be conducted on a not-
to-interfere basis with work being conducted.
Individual equipment will be inspected as
directed by the appropriate chapter of this
manual.
1-25
