TM 5-3610-257-14
Table 1-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
B- Before
W- Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
IN
FOR READINESS
ITEM TER
ITEM TO BE INSPECTED
REPORTING
NO.
VAL
PROCEDURES
EQUIPMENT IS
NOT READY /
AVAILABLE IF:
VAN BODY - Cont
1
W
Inspect Exterior - Cont
W
9.
Inspect two boarding ladders for:
a.
Secure attachment of handrails.
b.
Steps not broken.
c.
Quick-release pins in place.
B/D
10.
Inspect front and rear van body locks to be sure
/A
locks are fully engaged.
Q
11.
Inspect gaskets on personnel doors for leaks or
damage.
Q
12.
Clean and paint blistered, pitted, or flaking
areas and bare metal spots in accordance with
instructions contained in TM 43-0139, Painting
Instructions for Field Use.
2
Inspect Interior.
W
1.
Test emergency lights by pressing test button.
Emergency
lights do
not light.
D
2.
Inspect plug connectors to be sure all plug
connectors are tight and firmly seated. Tighten
if necessary.
D
3.
Inspect for burned out light bulbs and fluorescent
tubes. Replace as required.
1-24
