TM 5-3610-257-14
1-6.
OPERATION UNDER USUAL CONDITIONS. Operation of the Camera Section consists of activation of power
after the section has been located at the operation site and 12 V dc power disconnected.
1-6.1.
Preparation for Use.
a.
Procedures for leveling.
CAUTION
Trailer-mounted section must be on surface that is approximately level to avoid unnecessary
stress or twisting of chassis when section is leveled.
NOTE
•
Snow or ice should be removed from under leveling foot plate before attempting to level section.
•
Sand, soft ground, or mud requires that shoring or scrap material be placed under leveling foot
plate to increase surface area and prevent sinking into surface.
•
Be sure that air suspension is deflated as indicated in TM 5-2330-305-14.
(1)
Deflate air suspension in accordance with TM 5-2330-305-14.
(2)
Approximately level trailer chassis by raising or lowering landing gear.
(3)
Move handle from secured location and swing out.
1-30
