TM 5-3610-257-14
(2)
Remove storage tank drain cap from drain connection on outside of section.
(3)
Open storage tank drain valve and drain tank.
(4)
After storage tank is drained, open spigot for sink and drain hose into sink trough bin.
b.
Drain sink as follows:
(1)
Turn off POWER, SINK, and CABINET switches.
(2)
Secure any loose items that have been stored in refrigeration cabinet.
(3)
Remove sink and trough bin drain plugs.
(4)
Open drain valve for heat exchanger.
(5)
Close heat exchanger drain valve.
(6)
Wipe sink and trough bin dry.
(7)
Disconnect sink power cord.
Step 2.
Check that POWER and S19 WATER PUMP switches are on.
(a)
If switches are on, proceed to step, 3.
5-7.
OPERATION UNDER UNUSUAL CONDITIONS. This equipment is designed for operation only in a controlled
environment.
Section III. OPERATOR MAINTENANCE
5-8.
LUBRICATION INSTRUCTIONS. Refer to operator PMCS for required lubrication.
5-9.
TROUBLESHOOTING PROCEDURES.
a.
The table lists the common malfunctions which you may find during operation or maintenance of the sink, or its
components. You should perform the tests/inspections and corrective actions in the order listed.
b.
This manual cannot list all malfunctions that may occur, nor all test or inspections and corrective actions. If a
malfunction is not listed or is not corrected by listed corrective actions, notify your supervisor.
5-17
