TM 5-3610-257-14
Table 5-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES- Cont
B- Before
W- Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
IN
FOR READINESS
ITEM TER
ITEM TO BE INSPECTED
REPORTING
NO.
VAL
PROCEDURES
EQUIPMENT IS
NOT READY /
AVAILABLE IF:
PHOTOGRAPHIC PROCESSING SINK - Cont
4
W
Inspect Recirculating System - Cont
CAUTION
Do not turn S19 WATER PUMP switch on unless
water is in sink, or recycling pump will
burn out.
3.
Turn S19 WATER PUMP switch on.
4.
Check pump operation by observing water exiting
Water does not
outlet nozzle.
exit nozzle.
5
W
Inspect Plumbing.
1.
Check all hoses and fittings for leaks.
2.
Tighten clamps if leaks are observed.
3.
Replace damaged hoses, if necessary.
4.
Replace front cover and secure with latch.
Hoses are
damaged.
5-14