TM 5-3610-257-14
CAUTION
The exposure control instrument supplies line voltage to preselected camera and lighting circuits
during an exposure cycle. Be sure power ON and FOCUS switches are off before plugging in
instrument power cord, or damage to equipment may occur.
k.
Plug exposure control instrument power cord into ceiling outlet.
l.
Set camera AUTO/MAN switch to AUTO.
m.
For further operation instructions of camera, refer to TM 5-3610-258-14.
3-6.2.
Initial Adjustments, Daily Checks, and Self-Test.
a.
Initial preoperation check.
NOTE
This check should be performed upon, receipt of equipment and after movement.
(1)
Check that power cord is plugged in.
(2)
Place power switch to ON.
3-17
