Table 6-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont

Table 6-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES

Table 6-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont - TM-5-3610-253-14-2_23

TM-5-3610-253-14-2 Topogracphic Support System Finishing Section Model ADC-TSS-16 NSN 3610-01-105-6443 Manual
Page Navigation
6

TM 5-3610-253-14 Table 6-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont B - Before W - Weeklv AN - Annually (Number) - Hundreds of Hours D - During M - Monthly S - Semiannually ITEM NO. 1 B Q - Quarterly BI - Biennially ITEM TO BE INSPECTED PROCEDURE SHRINK WRAP SYSTEM - Cont 4. Plug in power cord. Turn control switch to COLD for^-30 seconds. 5. Turn control switch to HOT. flow control to change heat CAUTION Adjust air intake level. Failure to turn control switch to “cold” for at least 1 minute after operating heating element can damage heat gun or cause pre- mature failure. 6. Turn control switch to COLD for 1 minute. For Readiness Reporting, Equipment Is Not Ready] Available If: Heat gun does not heat. 6-6

Privacy Statement
Press Release
Contact