TM 5-3610-253-14
bt. Reconnect input power wires.
bu.
Remove sheets of metal.
Install all tiedowns.
bv.
Reinstall all loose objects and strapped down material.
bw.
Reinstall shock mounts for paper shredder.
bx.
Reinstall photolithographic cabinet (paragraph 8-16.3).
by.
Reinstall roadside wall storage cabinets (paragraph 8-16.2).
bz.
Reinstall photolithographic cabinet (paragraph 8-16.4).
ca.
cb.
Reinstall book and pamphlet stitcher (paragraph 3-16.10).
cc.
Reinstall paper drilling machine (paragraph 2-16.7).
cd.
Reinstall bindery table (paragraph 8-16.1).
ce.
Reinstall paper shredder (paragraph 4-20.10).
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Flat Tip Screwdriver
SUPPLIES: Connector Board
Emitter Diode and Lens
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using operator key, lock safety lock and keep key in your
b. Remove screws and right light barrier housing cover.
To replace connector board, proceed to step e.
c.
5-611
